Yale Assure Lock 2: check your door before you order
November 19, 2026
By the Pink Locksmiths editorial team. Updated November 4, 2026.
As an Amazon Associate we earn from qualifying purchases.
Measure the door prep and the backset before ordering the Yale Assure Lock 2, and compare them with Yale’s specifications. A smart lock can go wrong in two boring ways that have nothing to do with the app. The new lock does not fit the holes in your door, or it fits but the bolt drags in the frame and eats batteries. The Yale Assure Lock 2 is a common pick, and Yale publishes enough detail on its product page and in the installation manual to check both before you order. All you need is a tape measure.
Measure the door first
Open the door and take out nothing yet. Measure these, and write them down:
- Door thickness. Yale lists 1 3/8″ to 2 1/4″ for the Assure Lock 2. Most exterior doors in the US are 1 3/4″, so this is rarely the problem, but older or custom doors can be thinner or thicker.
- Backset. The distance from the edge of the door to the center of the big round hole. It should be 2 3/8″ or 2 3/4″. The lock adjusts between the two.
- The big hole (cross bore). Yale wants 2 1/8″. A 1 1/2″ hole works with the adapter Yale mentions; anything else means drilling.
- The hole in the door edge (edge bore). 1″.
- The pocket in the frame. The installation manual asks for a strike pocket at least 1″ deep. Push a pencil into the hole in the jamb where the bolt goes. If it hits wood after half an inch, you will be chiseling.
The manual also sorts the mounting screws by door thickness, with a different set for 1-3/8″, for 1-3/8″ to 1-3/4″ and for 1-3/4″ to 2-1/4″. Keep the bag that matches your door and put the others away so they do not get mixed up halfway through.
Keyed or keyless: decide by counting your doors
The Assure Lock 2 is sold with a key cylinder and without one. The keyless version looks cleaner, and if the batteries die you can still get in: the manual says to hold a 9V battery against the contacts under the lock, press the Yale logo and enter your code.
Read the warning in the same manual before you choose it, though. The keyless model “should only be installed on homes with more than one point of entry.” If this is your only door, buy the keyed version. A 9V battery is a good plan until the day you do not have one in your pocket.
On Amazon, the Yale Assure Lock 2 with Wi-Fi and keypad is the standard touchscreen version. The Assure Lock 2 Touch adds a fingerprint reader and keeps a key cylinder.
Check the exact model on the listing before you buy. The Assure Lock 2 name covers several versions, described below.
The same name covers different locks
Yale sells the Assure Lock 2 with built-in Wi-Fi, with Bluetooth only, and with optional plug-in modules for Wi-Fi or Z-Wave. There is also an Assure Lock 2 Plus, the one Yale lists with Apple Home Key, so you can tap an iPhone or Apple Watch to unlock. On Yale’s own store the Wi-Fi keypad model is $279.99, the Touch $299.99 and the Plus $309.99.
So “Assure Lock 2” alone does not tell you whether the box will work with your phone or your hub. Read the model number and the connection type on the listing. If you already run a Z-Wave hub, the module route may suit you better than Wi-Fi.
Batteries and the bolt
The lock runs on four AA batteries, included. Yale does not give a single battery life figure we could confirm, and in practice the biggest factor is one you control.
The manual is direct about it: “Smooth deadbolt latch operation will enhance your battery life.” It also asks you to make sure the bolt is centered in the hole in the door edge. A motor that has to push a bolt against the edge of a misaligned strike draws more power every time it locks.
Test it by hand before you mount anything electronic. With the door closed, turn the thumbturn of your current deadbolt. If you have to lift or push the door for the bolt to slide in, fix that first. Usually the strike plate needs to move a few millimeters, or the pocket needs to be deeper. Our post on strike plate screws covers the strike side, and you can replace the short screws while it is off.
Test auto-lock with the door open
Auto-lock is one of the main reasons people buy a smart lock. Before you trust it, prop the door open once and wait. If the bolt comes out while the door is still open, the next person who shuts it will hit the bolt against the frame instead of the strike. Go through the auto-lock settings in the app until that cannot happen, and do it on day one rather than after the first slam.
Weather
Yale rates the outside part of the lock from -22°F to 140°F and the inside from 5°F to 158°F. That covers most of the country. If your door faces west with no porch and is dark-colored, it can get hotter than the air around it in summer; that is worth a thought before you put any keypad on it.
When to call someone
If your hole is not 2 1/8″ or 1 1/2″, or your door is metal, or the pocket in the frame needs real work, a local locksmith can do the drilling and the strike adjustment and leave you to set up the app. If you hire an installer, say upfront that you already own the lock and ask for the labor price on its own.